Original poster: Vardan <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Over current is my guess...
I would think the "peak current" might have blown an internal strap
interconnecting the sections.
Or... The "RMS current" overheated the whole thing and blew the case apart.
You could probably figure it out by digging into the remains...
Better get an MMC ;-))
Cheers,
Terry
At 02:19 PM 5/14/2006, you wrote:
That Maxwell looks just like mine, it blew the same way last
week! What a mess!
Anyone have any thoughts if this failure mode is due to
over-voltage or over-current?
Curt.
----- Original Message ----
From: Tesla list <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Sent: Sunday, May 14, 2006 12:53:22 PM
Subject: Re: 11 foot arc right off the bat
Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx>
Miles,
Was the crack of the case of the 50 KV Maxwell
caused by internal failure or a drop on the concrete?
David Rieben
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, May 14, 2006 1:43 PM
Subject: 11 foot arc right off the bat
>Original poster: "miles waldron" <mileswaldron@xxxxxxxxxxx>
>
>I have become Ken's publicist. Check out the White Knight, kenscoil.com, >a
>work in progress. We are trying to come up with a practical, nice way, >to
>document our work and reasoning. Any suggestions are appreciated,
but >please
>be polite. We are serious coilers.
>
>http://www.kenscoil.com/whitenight-May-13-2006.htm
>