dual same plane toroids

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>

Hello,

I have a 36â??x8.25â?? 22awg coil with a 15 
degree .25â?? primary with a 32â??x8â?? torroid 
that has worked outstanding free break outs and 
6â?? arcs running 140v. there is also a 14â??x4 
siliconed and alum tape under it. That with a .03 
cap and taped near the 15 turn of the primary coil, tuned with a scope.

The gap was a RQ dual 1â?? dowels Seriously air blasted. Dual HP 15/60â??s.

Enter pig power, asrg 11â?? 1/8â?? electrodes 2 
fire parallel, .09uf , 200 + bps.

Clearly, my ratio doesnâ??t warrant it but has 
any one tried to add a toroid to the outside of 
the upper torriod? Otherwise Iâ??ll be tapping at 
turn 7. It would be a cool way to tune. I may try 
this with my 12â?? coil which Iâ??m going to wind 
at the Neveda Stateline at the casino back lot. 
1/8â?? PVC 6 footer. Its been in plastic in the 
house all winter with a few pounds of silica gel â?º

Thanks,
Jim Mora