[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Need GE MOV data

To: tesla@xxxxxxxxxx
Subject: Re: Need GE MOV data
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Thu, 30 Mar 2006 17:14:22 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Thu, 30 Mar 2006 17:05:24 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <nM7_6mldkWO.A.ktD.EJHLEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "BRIAN FOLEY" <ka1bbg@xxxxxxxxxxx>

Hi, usually the first number is usually the voltage as you suspect. v150 is
the voltage and the next number is the current rating in joules i think. cul
brian f.
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, March 30, 2006 5:44 PM
Subject: Need GE MOV data


> Original poster: "Lau, Gary" <Gary.Lau@xxxxxx>
>
> I'm looking to add some MOV protection to my Variac/control box.  I
> found a handful of MOV devices, but I can't seem to locate any data
> sheets on the web.  The devices are marked with the GE logo, "V150
> LAX1002".  Does anyone have a reference or cross-reference book to
> indicate what I have?  I'm hoping that the V150 indicates that it will
> be fine at 150Vrms, on the 140V side of my Variac.
>
> Thanks in advance,
> Gary Lau
> MA, USA
>
>
>

Prev by Date: Re: Dwell time, etc
Next by Date: Re: Need GE MOV data
Previous by thread: Need GE MOV data
Next by thread: Re: Need GE MOV data
Index(es):
- Date
- Thread