[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: primary voltage

To: tesla@xxxxxxxxxx
Subject: Re: primary voltage
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Thu, 30 Mar 2006 15:44:39 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Thu, 30 Mar 2006 15:51:22 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <npKpNHYU0GJ.A.5VF.qDGLEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: FutureT@xxxxxxxIn a message dated 3/30/06 9:31:16 AM Eastern Standard Time,tesla@xxxxxxxxxx writes:

I see most people use 14.4KV or 15KV for their primaries.

Has anyone had any experience using 19.8KV or 20KV? Was it hard to control?
What were your results?

Kevin M. Conkey



Kevin,

Results are similar.  THere are no real control issues at the higher
voltages you mention.

John

Prev by Date: Re: doubled up toroids
Next by Date: Re: Dwell time, etc
Previous by thread: Re: primary voltage
Next by thread: Terry Filter
Index(es):
- Date
- Thread