[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

secondary coil for pole pig

To: tesla@xxxxxxxxxx
Subject: secondary coil for pole pig
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Tue, 14 Mar 2006 21:30:50 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Tue, 14 Mar 2006 21:29:53 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <cQZnCn1ah4H.A.0SE.Bh5FEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "miles waldron" <mileswaldron@xxxxxxxxxxx>

Is it OK to use one of those quick crete card board tubes from Home Depot
that is 8 inches or 12 inches in diameter to build a 1200 turn #20 wire
secondary? I want a big secondary to work with my 15KVA pole pig. The card
board tubes seem to be waxed inside. If this is possible can someone provide
any advice? If this is not a good idea, can someone please tell me why?

Thanks!

Prev by Date: Re: Static Gap Break Rates
Next by Date: Re: De-potting and re-potting a pole pig: Insulation concerns.
Previous by thread: Re: 3/8 inch tungsten rod - group buy UPDATE
Next by thread: Re: secondary coil for pole pig
Index(es):
- Date
- Thread