[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tungsten rod - GROUP ORDER

To: tesla@xxxxxxxxxx
Subject: Re: Tungsten rod - GROUP ORDER
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Mon, 13 Mar 2006 02:51:10 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Mon, 13 Mar 2006 02:43:37 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <-6uCigrrQxE.A.NKG.J7TFEB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Jon Danniken" <danniken@xxxxxxxxxxx>

> Original poster: "Stephen Mathieson"
> No, I used 1/4" tungsten for my flying electrodes and for the fixed
> electrodes I ordered some 1/2" electrodes from Miller.
>
> For flying electrodes 1/4" works fine at 10KW.

Stephen, do you remember (or have written down) the part number for the 1/2"
electrodes you bought from Miller?  I get blank stares when I ask locally,
and a part number would be very helpful.

Jon

Prev by Date: Re: MOT Shunts
Next by Date: Tungsten rod 1/2 inch x1.5
Previous by thread: Re: Tungsten rod - GROUP ORDER
Next by thread: RE: I'm a newbie coiler!- apartment coiling
Index(es):
- Date
- Thread