Re: Holy Crap!

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Nick Andrews" <nicothefabulous@xxxxxxxxxxx>

Yeah, I should have read the newer posts, didn't think of the old, 
post-and-tube wiring, since you don't see much of that at all here in NM!
Should be a perfect ready-made solution.

Nick A


> From: "Tesla list" <tesla@xxxxxxxxxx>
> To: tesla@xxxxxxxxxx
> Subject: Re: Holy Crap!
> Date: Mon, 12 Jun 2006 11:49:25 -0600
>
> Original poster: Mddeming@xxxxxxx
>
> In a message dated 6/12/06 11:57:01 A.M. Eastern Daylight Time, 
> tesla@xxxxxxxxxx writes:
> Original poster: "Nick Andrews" <nicothefabulous@xxxxxxxxxxx>
>
> Could you form a tube from drywall joint compound
> or similar maybe?  Stucco mix might even work.
>
> Nick A
>
>
> Hi Nick,
>
>     Sounds rather flimsy. A few simple tests with readily available 
> 75-cent tubes would obviate the need for a large number of 
> postulations. i.e. some interested party could try it Then, IF 
> existing ceramic tubes don't work there would be a justification 
> for fabricating new devices..
>
> Matt D.