[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: toroid HV terminals for Tesla coils and Van de Graaff generators



Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>


Without any shipping costs approx $210.00.

Dr. Resonance



D.C -

No need for a formal "written estimate" on official RRC letterhead - just
post the info here on the TCML. Besides, if you are placing the order Thursday than any information sent via mail will be useless ....

I'm sure there are a number of TCML readers who are interested in your next 20" X 5" toroid "bulk buy", but would like some idea up-front
if the approximate cost will be $100, $200, $300 or ?? per toroid.

Regards,
Scott
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Tuesday, July 04, 2006 4:33 AM
Subject: Re: toroid HV terminals for Tesla coils and Van de Graaff
generators


Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>


Need your mailing address and zipcode for the estimate.

DC



Dr. Resonance
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, July 03, 2006 4:47 PM
Subject: Re: toroid HV terminals for Tesla coils and Van de Graaff
generators


Original poster: "Scott Hanson" <huil888@xxxxxxxxxxxx>

D.C. -

Can you provide some ballpark estimate of the cost of these toroids?

If you just let us know the "worst-case" pricing based on your own order
size, this would help put things into perspective. Beyond the worst-case
estimate, the per-toroid pricing would only get better as additional list
members added their orders.

Regards,
Scott Hanson
----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, July 03, 2006 9:50 AM
Subject: toroid HV terminals for Tesla coils and Van de Graaff generators


Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>


On Thursday I will be entering a "batch order" for 20 x 5 inch size spun
aluminum toroids.  These may be used for either Tesla coil toploads, Van
de Graaff collector terminals (pulleys may be "sandwiched" between two
toroids, Cockkroft-Walton multipliers, or Marx impulse generators.

By entering a batch order we get a 30-40% discount on the per toroid
cost --- dependent on the number of terminals ordered.  Delivery is
typically 4-5 weeks ARO.

If interested, contact me off-list and I will add you to my order count.
By Thurs afternoon, depending on number of persons interested, I will
enter the order and have a final price.  I will need your full mailing
address and zipcode to estimate shipping costs.

Dr. Resonance