[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Top Load

Original poster: "Rich & DJ" <rdj@xxxxxxxxxxxx>

I have a question on the normal location of a top load. My new coil will max out at 13Kv .150ma , secondary is 6.5/8 dia , is there a standard starting point for the top load? I see pictures of other coils, some show it several inches above the top of the secondary winding , others are quite low with the lower part of the top load below the plane of the upper winding of the secondary.
Any suggestions on a starting point ?

            Rich , from the middle of Missouri