[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MMC bleed resistors



Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

10 Mohm 1/2 watt is what most use. However, leads aren't long enough for the 0.15uf so I put two 10Mohm resisters is series.

Gerry R

Original poster: "Gates" <ryker@xxxxxxx>

What value of bleed resistors can I use for my mmc setup?
I have 2000V CDE caps of .15mF
Thanks Gang
Gates