[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Tungsten Blanks



Original poster: Thomas Coyle <zxcasd@xxxxxxxxx>

The actual McMaster numbers are:

Tungsten Carbide, 1.024" diameter:
6": 191.37
12": 365.71

High-density tungsten alloy rod, 1" diameter:
8": 236.47
12": 325.31



On 1/6/06, Tesla list <<mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx> wrote:
Original poster: Thomas Coyle <<mailto:zxcasd@xxxxxxxxx>zxcasd@xxxxxxxxx>

McMaster is $250+... if you do find a place that can do it for $100,
I'd definitely be interested too. :)

On 1/6/06, Tesla list <<mailto:tesla@xxxxxxxxxx><mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx> wrote:
Original poster: "David Rieben"
<<mailto:drieben@xxxxxxxxxxxxxxx><mailto:drieben@xxxxxxxxxxxxxxx>drieben@xxxxxxxxxxxxxxx >

Mike,

Probably McMaster-Carr. Check out their webpage under "tungsten".

David Rieben

----- Original Message ----- From: "Tesla list"
<<mailto:tesla@xxxxxxxxxx> <mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx>
To: <<mailto:tesla@xxxxxxxxxx><mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx>
Sent: Friday, January 06, 2006 11:04 AM
Subject: Tungsten Blanks


>Original poster: "MIKE HARDY" < <mailto:MHARDY@xxxxxxxxxx><mailto:MHARDY@xxxxxxxxxx>MHARDY@xxxxxxxxxx>
>Earlier this summer there was a discussion on drill blanks for
>rotary electrodes. Someone pointed to a vendor that had 1 inch
>diameter X 8" tungsten drill blanks for about $100 each. Does anyone
>recall the vendor, and how to find this product?