Re: A question of coupling

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "David Rieben" <drieben@xxxxxxxxxxxxxxx>

Curt,

I suppose you could say either the top, bottom,
or center of the primary tubing of the primary coil,
assuming that it is a flat spiral "watch spring" style
primary coil. "I" personally refer to the top surface
of the primary coil tubing in reference to the bot-
tom-most winding of the secondary coil.
David Rieben


----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Thursday, January 05, 2006 3:10 PM
Subject: Re: A question of coupling


> Original poster: "C. Sibley" <a37chevy@xxxxxxxxx>
> > I bet you need this size sec approx 1/2 inch above
> > the horizontal
> > plane of the pri
> What do you mean by horizontal plane of the primary,
> the plane of the base or at the top?
> Thanks,
> Curt.