[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: HV xray cable revisited

Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>

Hi Mike,
Was it necessary to strip? Seems like you could have simply routed as is (at least, that's what I was thinking at the time for a quick solution). 

Take care,
Bart

Tesla list wrote:


Original poster: "MIKE HARDY" <MHARDY@xxxxxxxxxx>

Thanks Bart & Clint for the help. I ran my coil last night. I ran Prety darn
good, but not at it's best. I ran the leads in PVC pipe. Stripping that hard
black covering off is no easy task. Stripping back 8" with a bench belt
sander takes 20 minutes or so.I can't even imagine doing a 20 foot run!
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, January 01, 2006 10:33 AM
Subject: Re: HV xray cable revisited


> Original poster: ClintLightning@xxxxxxx
>
> I just got a bunch of xray cable. I strip off everything except the 3
> conductors, then burn or strip off a insulation. Then I solder the
> bare 3 wires together, then electric tape em and attach terminal.
> HAPPY NEW YEAR !!
>
>