[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Homemade Voltage Divider

To: tesla@xxxxxxxxxx
Subject: RE: Homemade Voltage Divider
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Thu, 02 Feb 2006 08:43:55 -0700
Delivered-to: testla@xxxxxxxxxx
Delivered-to: tesla@xxxxxxxxxx
Old-return-path: <vardan01@xxxxxxxxxxxxxxxxxxxxxxx>
Resent-date: Thu, 2 Feb 2006 08:35:59 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <zDSuDjo0pJ.A.ZiH.fbi4DB@chip1>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Philip Chalk" <philip@xxxxxxxxxxxxxxxxx>

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Tuesday, 31 January 2006 20:36 pm
To: tesla@xxxxxxxxxx
Subject: Re: Homemade Voltage Divider

Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>

You never need to measure the DC voltage.  It's
always 1.414 x the Erms,

>> Only on the  assumption that what you're measuring is a sine wave, or
something of identical form factor.....

so you are actually
measuring Erms and then just recalibrating the
meter face to reflect the actual measured DC
potential.  No messing around with HV resistors, etc.

Dr. Resonance

Prev by Date: RE: Plastics question, rotary shield
Next by Date: Re: Homemade Voltage Divider
Previous by thread: Re: Homemade Voltage Divider
Next by thread: Re: Homemade Voltage Divider
Index(es):
- Date
- Thread