[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: question for coin shrinkers



Original poster: "resonance" <resonance@xxxxxxxxxxxx>



A 3/4 inch plywood with a 1/4 sheet of Lexan attached to it works very well.

Dr. Resonance


Interesting. I have no experience at all with quarter shrinking but I have a
lot of experince with uhhh, exploding things. I can say that 1/2" steel
plate is complete over kill. The most important thing here is to have a vent
of some type for the expanding gasses to escape, other wise all you are
making is a larger "bomb" that had you detonated it in the open! The cabinet
should have an indirect vent that will allow the gases to vent but still
deflect any fragments.