[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
12470Y/7200 "wye configuration.."
Original poster: "Chip Ford" <chipford@xxxxxxxxxxxxxx>
I always post then, go looking for the answer to the question I
asked. I have done some reading and it seems that the wye config.
applies to only (3) phase transformers. Wye is called wye because
that is what the wiring diagram looks like....a "Y". I learned that
in a wye config., you will get 1.732 (sq. rt. of 3) times the voltage
across phases as you do from phase to ground/neutral. that is why the
transformer I found says 12470Y/7200. 7200 * 1.732 = 12470
volts..Now..I have a question. Is it ok to use a (3) phase pig @
12470 volts wye to run a tesla coil?.I don't see a problem...You just
don't use one legs...I don't think you would even have to feed it (3)
phase. If so, all you need is a (3) phase motor to manufacture the
3rd. leg. Any comments will be appreciated...Thanks...Chip Ford