RE: Cap Formulas (fwd)

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Fri, 15 Dec 2006 18:46:55 -0800
From: Anthony R. Mollner <penny831@xxxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: RE: Cap Formulas (fwd)

Cool, that's what I needed, thank you. My SRSG is about ready now so all I
need to do is solder up an MMC and I'll be good to go! Well, I still need to
add a motor starter capacitor to the salient pole motor and that's holding
me back a little. I can't find spec.'s for the right value cap. How do I
determine what might be a good value to use on the motor? Any ideas on that?

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Friday, December 15, 2006 10:18 AM
To: tesla@xxxxxxxxxx
Subject: Re: Cap Formulas (fwd)


Original poster: Gerry Reynolds <greynolds@xxxxxxxxxx>



---------- Forwarded message ----------
Date: Fri, 15 Dec 2006 08:58:25 -0700
From: resonance <resonance@xxxxxxxxxxxx>
To: Tesla list <tesla@xxxxxxxxxx>
Subject: Re: Cap Formulas (fwd)




Cres x 2.6 is a good value.  Calculate the resonant value (impedance match
value), and then multiply by 2.6 for the correct for for synchro spark gap
operation.

Dr. Resonance


>
> ---------- Forwarded message ----------
> Date: Thu, 14 Dec 2006 18:53:33 -0800
> From: Anthony R. Mollner <penny831@xxxxxxxxxxxxx>
> To: Tesla list <tesla@xxxxxxxxxx>
> Subject: RE: Cap Formulas (fwd)
>
> Speaking of cap. formulas, I'm trying to find a chart on SRSG values. ALl
> I
> have any luck fining is on static and rsg's.
> Tony