[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Capacitor needed



Original poster: "Lau, Gary" <Gary.Lau@xxxxxx>

For some reason, the France-branded 4/20 NSTs were quoted by several
distributors as being over $50 each.  I then found that Actown (also
makes a line of open-frame NST's, and any number of their distributors
quoted, from distant memory, something in the high $20's.  I bought one,
it worked, and although it was indeed open frame and not potted, the
core construction was such that the shunts could not be removed.  It's
possible that a careful session with a drill press might succeed in
reducing the core-area, effectively reducing the shunt and increasing
the current, but I've not tried that.

I just tried Googling Actown, and saw a link "Actuant Acquires Actown".
They still appear to make outdoor NST's, but jkust looking quickly,
didn't see the small open frame units :-(

Regards, Gary Lau
MA, USA


> Original poster: "Alan Majernick" <rainylake@xxxxxxx>
>
> Hi Everyone: Does anyone have one (or more ) of the open frame
Franceformer
> transformers shown in Gary's coil they would be willing to sell? Let
me know
> or contact me off list.
>
> Thanks Alan
>
> -----Original Message-----
> From: Tesla list [mailto:tesla@xxxxxxxxxx]
> Sent: Tuesday, December 05, 2006 2:08 PM
> To: tesla@xxxxxxxxxx
> Subject: RE: Capacitor needed
>
> Original poster: "Lau, Gary" <Gary.Lau@xxxxxx>
>
> .0265uF is fairly large, uncommon, and expensive if you're talking
> strictly about mica caps.  Is there a reason you can't use more
commonly
> available polypropylene caps?  Four 0.1uF/2kV caps will give you a
very
> economical .025kV/8kV cap.  I use this with a 4kV/20mA NST with
> excellent results.  See http://www.laushaus.com/tesla/minicoil.htm
>
> Regards, Gary Lau
> MA. USA
>
>   > Original poster: "Jack" <Jack@xxxxxxxxxxxxxxx>
>   >
>   > Hi all,
>   >
>   > I would like a .0265 mica rated at least 10KV for a small 3KV/30
NST
> project.
>   >
>   > Does anyone have something that will work?
>   >
>   > Thank you,
>   >
>   > Jack
>   > Hilo
>   > Have a great day!
>   >
>