Re: OBIT'S

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Shane Rusch" <srusch3083@xxxxxxxxxxxxx>

On the primary side you have 4 wires to deal with,parallal these to 120v
input, on the sec side  parallal output
to jacobs ladder, observe arc length,remove power, invert primary leads of
ONE of the xformers, the correct phase is the strongest arc
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, December 01, 2006 9:16 PM
Subject: Re: OBIT'S


> Original poster: "Gates" <ryker@xxxxxxx>
>
> How do you phase them?
> Gates
>
> -------Original Message-------
>
> From: Tesla list
> Date: 01/12/2006 2:31:03 PM
> To: tesla@xxxxxxxxxx
> Subject: Re: OBIT'S
>
> Original poster: "Shane Rusch" <srusch3083@xxxxxxxxxxxxx>
>
>
> ----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Thursday, November 30, 2006 9:09 PM
> Subject: OBIT'S
>
>
>  >Original poster: "Gates" <ryker@xxxxxxx>
>  >
>  >Hey gang I would like to know if it's possible to put two OBIT'S in
>  >series to double the voltage.
>  >Thanks
>  >Gates
> No, the insulation will be overstressed. Parallal them with the
> proper input phasing, using a crude jacobs ladder, the right phase
> gives the best traveling arc.
>
> Shane.....
>
>