[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ion inception voltage in oil

Original poster: Mddeming@xxxxxxx In a message dated 8/10/06 2:58:18 P.M. Eastern Daylight Time, tesla@xxxxxxxxxx writes:
Original poster: "Mike" <mike.marcum@xxxxxxxxxxxx>

I guess it depends on the oil (type, how dry it is, etc). I'd bet
that it's at least 4kv/mm based on the dielectric strength of diala-a
(200kv/inch irrc). Never actualy tested that tho since you'd probably
have to pour it in a 0 humidity clean room to maintain that.


Hi Mike

FWIW, 200 kV/inch = ~7.8 kV/mm.

Matt D.