[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MOT Stack Construction



Original poster: "Daniel Seidel" <dfseidel@xxxxxxx>

I am planning to make a 4 mot stack. It will be fed with 240v
with two mots per leg. What is the best way to connect the
secondaries that were originally attached to the core (ie
crimp/solder a spade connector or what) Also what is a good gauge
to use for attaching the primaries and secondaries?  Thanks!
(this may get sent multiple times to the list, if so let me
appologize in advance)