[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LM12CL Low-Z Amp
- To: tesla@xxxxxxxxxx
- Subject: Re: LM12CL Low-Z Amp
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 30 Sep 2005 09:37:06 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Fri, 30 Sep 2005 09:35:29 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <Ev6zMD.A.T3C._sVPDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: stork <stork@xxxxxxxxxxxxxxxxxxx>
I built Terry's amp and it is very stable. It reproduced a square
wave fairly well at 100 kh and a sine wave about 200 kh. Its output
is amazingly stiff and can actually be shorted without damage.
Stork
Hey.... Maybe we can use it as a buffer amp in your planewave
antenna to verify the low frequency performance (where the
termination starts opening up below 150KHz).
Gerry R.