[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Tesla Coil RF Transmitter
- To: tesla@xxxxxxxxxx
- Subject: Re: Tesla Coil RF Transmitter
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 19 Sep 2005 16:41:53 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Mon, 19 Sep 2005 16:45:01 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <m_XO1B.A.Yz.s9zLDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Steve Conner <steve@xxxxxxxxxxxx>
Maxwell's equation curl H= J+dD/dt requires an electrically closed
loop circuit.
The textbook interpretation is that all of Maxwell's equations are
valid anywhere in space whether any conductors are present or not.
Again, if you don't believe in displacement current, you still have
to explain how electrostatic forces can do mechanical work. If you
agree that there can be no electrical power without voltage and
current being present at once, then you must admit that there can be
no mechanical work without E x H. So if you are able to move a
non-conducting object using an electrostatic field, displacement
current must exist. That is my argument and I'm still waiting to see
a counter argument.
>No one can experimentally measure a magnetic field produced by
a >"dispalcement current" in a dielectric field.
Explain how the balloon pulls up to the ceiling and sticks to it
after rubbing on the cat, then. If mechanical work was performed,
there must be both E and H fields present, and the only thing that
could have created the H is displacement current since there are no
conductors present to carry conduction current.
Steve Conner
http://www.scopeboy.com/