[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Varnishing my secondary.
- To: tesla@xxxxxxxxxx
- Subject: Re: Varnishing my secondary.
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 14 Sep 2005 20:35:50 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Wed, 14 Sep 2005 20:40:16 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <GZDzp.A.wHC.77NKDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Ed Phillips <evp@xxxxxxxxxxx>
Remember that varnishing isn't really necessary at all if the turns are
tight and even a light coat can keep the turns in place while you tune
up and enjoy your coil. Reserve the fancy coatings until you have a
fancy coil or are satisfied that this one is good enough for you.
Ed