[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Introduction / LTR caps

To: tesla@xxxxxxxxxx
Subject: Re: Introduction / LTR caps
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Tue, 06 Sep 2005 09:07:48 -0600
Delivered-to: testla@pupman.com
Delivered-to: tesla@pupman.com
Old-return-path: <vardin@twfpowerelectronics.com>
Resent-date: Tue, 6 Sep 2005 09:09:47 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <ZPiWBB.A.GhH.4EbHDB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Mark W. Stolz" <mark_w_stolz@xxxxxxxxxxx>

I would have to disagree. The 10kVA coil we recently built uses a .130 nF MMC and has had no problems, even with several minute runs.

Mark Stolz
http://teslacoils4christ.org/

Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
Don't use with pigs. With a .05 uF Maxwell cap on a pig powered coil we measured 2,300 Apms peak on pri ---- too much for MMCs.

Dr. Resonance

Prev by Date: Re: asking for assistance Katrina Scot D
Next by Date: Re: SIBNIIE
Previous by thread: Re: Introduction / LTR caps
Next by thread: Re: Introduction / LTR caps
Index(es):
- Date
- Thread