[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Introduction / LTR caps
- To: tesla@xxxxxxxxxx
- Subject: Re: Introduction / LTR caps
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 05 Sep 2005 13:59:00 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Mon, 5 Sep 2005 13:59:54 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <sa5qW.A.0aD.4OKHDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
Don't use with pigs. With a .05 uF Maxwell cap on a pig powered coil
we measured 2,300 Apms peak on pri ---- too much for MMCs.
Dr. Resonance
.....does this chart work for 'NON' neon powered coils (pigs,mots
,etc ) also ? so, at 200-220ma , I'll need .05mfd or more ? Thanks, dave