[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Need more power
- To: tesla@xxxxxxxxxx
- Subject: Re: Need more power
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 27 Oct 2005 12:13:07 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Thu, 27 Oct 2005 12:15:07 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <mdeim.A.5t.pkRYDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Liviu Vasiliu <teslina@xxxxxxxxx>
1. Put 240 V on the secondary of the MOT and measure
the voltage on primary. You will get the
transformation raport k = U1/U2 = N1/N2. Than it will
be easy to calculate the output voltage.
2. Using above meathod is not necessary to use the
probe and probably not too indicated.
vasil
>
>
--- Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: "The Engine Centre"
> <jetmac@xxxxxxxxxxxxxx>
>
> G,Day all, im the "chocholate block" capacitor man,
> got my first ever
> coil going last weekend, loved the smell, but only
> half impressed
> with the spark/arks, the caps work great but my
> input power is only 10/50 nst.
> Q1 I have an industrial MOT its 240v input, the
> primary measures 1.5
> ohms , secondary 87 ohms, what V..out can i expect ?
> Im trying to
> find some mates to series with it !!
>
> Q2 Have just purchased a high voltage dc probe,
> (direct reading) can
> i put a HV rectifier string in series with the probe
> to mesure AC
> voltages, like MOT 's ect.?
>
> WX 28c no rain expected, cheers all. Paul
>
>
>