[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
another CRY for HELP!
- To: tesla@xxxxxxxxxx
- Subject: another CRY for HELP!
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 25 Oct 2005 13:43:30 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Tue, 25 Oct 2005 13:46:30 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <K0RwcD.A.XKB.VuoXDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Timjroche@xxxxxxx
hey all
i built :
sec: 3.3" x 20" 24 gauge
pri: 13 turns .25" tube, .25" spacing, 20 degree frm turn 1 to 13
topload: 18" x 4"
S.S.G. : 9 copper tubes (4 shorts for 4 gaps total)sucker gap
12Kv/60mA NST
130uf PCF caps
Cap: 2 1500mL wine bottles, 7 40 oz bottles.....total cap. size approx. .01uf
Variac
the best spark is 5-6" to gnd and looks very "flybackish".....thin
and always 1 streamer...primary tap comes out to about 8.5 turns, any
where else there is nothing...the sec to pri distance is 1.5" radius
apart and sec is .5" above pri. first turn....any thoughts....wih a
12Kv/60mA i should get a little more, eh? i don't have a website,but
got a digi.camara & can email picts....
tim