[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Primary spacing question
- To: tesla@xxxxxxxxxx
- Subject: Re: Primary spacing question
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 18 Oct 2005 13:22:21 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Tue, 18 Oct 2005 13:22:31 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <EB5PPB.A.STC.2tUVDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Gerry Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
Hi Brad,
1 - 1 1/2 inch clearance should be enough.
Gerry R
Original poster: "bmcpeak" <bmcpeak33@xxxxxxxxxxx>
Hello Group,
I am working on the construction of my two coils and would like to
ask the group their opinion on the spacing of the inner turn of the
primary coil to the secondary.
Coil #1... 6 inch o.d. form, 15000/60 m.a. NST, LTR MMC cap .0150 uF.
Coil #2... 3 inch o.d. form, 7500/60 m.a. NST, LTR MMC cap .0300 uF.
T.I.A.!!!
Brad McPeak