[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: lil help please



Original poster: BunnyKiller <bunikllr@xxxxxxx>

Hey Jim...

I have a primary coil already made and sitting in the shop but since the hurricane I have stopped working on the unit. If you are interested in it we can talk a bit more via email.... since you are aiming for 6KV this primary may be of use to you... I dont remember the exact dimentions but if you are somewhat interested I will make measurements of it and tell you more about it ( could even send pictures of it too).... if you are really interested in the system that I had started, I have some Chenelac caps ( supposed to be really great caps) and a rotary spark gap available for a price to be haggled over....

Scot D





Tesla list wrote:

Original poster: Jimbo07031982@xxxxxxx
i am getting ready to build my 2nd t.c and was wondering what is the best way to form a primary coil (the first one i every built was just literally thrown together the primary was formed by hand and looked like crap turned out it was crap too) is there any tools that would help in the forming of this to make a nice uniform coil and what would be the best thing ti use (the first one i built i used 3/8 inch copper tubing should i go bigger or smaller) i do have some electronics background but not much and i am horrible at math because of this i am having some trouble designing and building a good coil (if there is anyone willing to help through this step by step please let me know of list at <mailto:jimbo07031982@xxxxxxx>jimbo07031982@xxxxxxx) Also I hope to be in FL for the 2005 teslathon I am moving down just as soon as I finish taking care of some things up here in Ohio. Hopefully I can get some good pointer's and idea's if I am able to make. thanks a bunch. JIMBO


p.s I will be using a 6kv 30 ma nst to power the whole thing and have 6 400pf 30kv caps in parallel and are ceramic doorknob style I do have a variac that I use that goes up to 140v ac.
also the first coil i built i connected the primary and secendary coils together would this cause a lose in performance and i did not seal the ends of the sec, coil at all like i said i just threw the thing together to see if a could get something to work altogether i think i spent $50 building the whole thing besides the obvious flaws with the sec. what can i do to get spark's bigger then 4-6 inch long seeing as that is the biggest i was able to get.(do i need more v or is what i have sufficent i am aiming to get at least 20-24 inch sparks out of my next coil