[Fwd: California Instruments AC Power Supplies in Stock]

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: stork <stork@xxxxxxxxxxxxxxxxxxx>

Terry, list

I received this today and it is interesting for a 
PS.  Is anyone familiar with the how it 
works?  Could they possibly replace a variac?

Stork


To: stork@xxxxxxxxxxxxxxxxxxx
From: eSales@xxxxxxxxxx
Subject: California Instruments AC Power Supplies in Stock
Organization: Tucker Electronics
Date: 12 Oct 2005 12:22:52 -0500
X-MOR: 0
X-MOP: 0
X-MMX: 0
X-MMC: 227
X-MMR: 0



California Instruments AC Power Supplies in Stock
California Instruments P Series
The 801P, 1001P and 1251P are ideal sources for 
general purpose AC power applications. With 
simple knobs used to set voltage, frequency and 
current limit, the P Series provides an 
inexpensive source of AC power in a small, portable and lightweight package.
Exclusive Features:
Low Cost
Programmable
Dual voltage ranges
16 Hz to 500 Hz
Up to 1250VA output depending on model
Simple Front Panel Connection
UL and CSA Safety Tested, CE Mark

California Instruments RP Series
The RP Series consists of four models, 801RP, 
1251RP, 2001RP and 2003RP. These units are ideal 
sources for general purpose AC power applications 
that require variable voltage and frequency at 
power levels up to 2000 VA. The 2003RP provides 
three phase output, all other models provide 
single phase output. All RP Series power source 
models can be used in table-top mode or rack-mounted.
Exclusive Features
Single (801RP, 1251RP and 2001RP) or Three phase output (2003RP)
Rack Mount
Programmable
Dual voltage ranges
16 Hz to 500 Hz (801RP and 1251RP) or 16 Hz to 5000 Hz (2001RP and 2003RP)
Standard Current measurement
Optional measurements for Peak Current, Voltage, 
Real Power, Apparent Power, Power Factor and Crest Factor
Simple Front Panel and Rear panel Connections. 
(Front panel connections optional on 2001RP.)
Optional IEEE-488 and RS232C interfaces
CE Mark




California Instruments 5001iX
The iX Series offers 3 or 5 kVA high output AC 
and DC power units in a small amount of space.The 
iX Series is a full featured source offering 
transient generation, arbitrary waveform 
generation, standard measurements, harmonic 
analysis, waveform acquisition and programmable 
impedance. This integrated, multi-instrument 
approach, effectively eliminates the need for 
additional equipment to create an AC and DC power 
test system. The extended output frequency range 
of 16 Hz to 500 Hz makes the iX Series suitable 
for both commercial and avionics applications.
Exclusive Features
Arbitrary waveform generation
Extensive output transient generation
Arbitrary waveform generation
Extensive output transient generation
Voltage, Current and Power measurements
Harmonic analysis of Voltage and Current
Waveform acquisition of Voltage and Current
Programmable output impedance
Drive non-linear loads without derating
Full output power with 0 to 1 power factor
Drive high inrush current input stages
High peak current capability with up to 5:1 crest factor
Panel height only 7 inches
Compact design saves on rack space
SCPI programming language support and free application software
Closed Case Calibration
Optional MIL-STD704 (rev D and E), 
160RTCA/DO-160D, IEC 1000-4-11 and IEC 1000-4-13 tests A
Contact Tucker Worldwide
www.tucker.com
This is a Tucker Electronics advertisement. You 
are receiving this email at 
stork@xxxxxxxxxxxxxxxxxxx because of a previous 
permission granted to tucker.com or 
planettest.com to accept email notifications from 
us. If you no longer wish to receive email from 
us, email unsubscribe@xxxxxxxxxx and put "remove" 
in the subject line and we will promptly remove you from our list.
Corporate Headquarters: 1717 Reserve St., 
Garland, TX, 75042-7621 ©2005 Tucker Electronics