[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
half filter?? and what all I need before primary circuit
- To: tesla@xxxxxxxxxx
- Subject: half filter?? and what all I need before primary circuit
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 12 Oct 2005 19:16:24 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Wed, 12 Oct 2005 19:21:54 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <IBZpvB.A.YXH.xabTDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Langer Giv'r" <transworldsnowboarding19@xxxxxxxxxxx>
Hi, i was wondering instead of using the entire terry filter design,
could i just use the MOV's, safety gap, and resistors, and leave out
the highly expensive caps and still get a relative ammount of safety?
if not... what is the best way to get protection for my 9KV30mA "
cheaply and effectively "
what is all you need basically before you send off the power towards
the tank cap and spark gap? like filter / RF chokes / safety gap? i
am still a little confused and before i buy the parts (I am poor) i
would really like to know what all to buy. Thanks a million!
Daniel from Canada