[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: OL-DRSSTC 7 - It's Alive!

To: tesla@xxxxxxxxxx
Subject: RE: OL-DRSSTC 7 - It's Alive!
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Tue, 11 Oct 2005 23:10:53 -0600
Delivered-to: testla@pupman.com
Delivered-to: tesla@pupman.com
In-reply-to: <C815C86278BA0641BF21755B3D9CC434CAC727@peter.questacon.edu .au>
Old-return-path: <vardin@twfpowerelectronics.com>
References: <C815C86278BA0641BF21755B3D9CC434CAC727@peter.questacon.edu.au>
Resent-date: Tue, 11 Oct 2005 23:13:14 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <d0iE0.A.XdB.otJTDB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>

Hi,

At 08:26 PM 10/11/2005, you wrote:

Hi Terry,

Just to sum things up then, this is what you are telling me.

The energy dissipated in the die during switching is the most
significant issue to worry about in my application and probably pushing
the little dies over the edge.


Yes.

If so then switching as close to zero
current as possible is the way to stop this mode of failure.

Yes. It help to keep the heat sinks as cool as possible too so the die start out cold.

Cheers,

        Terry

Cheers,
Jason.

Prev by Date: Re: OL-DRSSTC 9 - Better trigger!!
Next by Date: RE: OL-DRSSTC 7 - It's Alive!
Previous by thread: RE: OL-DRSSTC 7 - It's Alive!
Next by thread: RE: OL-DRSSTC 7 - It's Alive!
Index(es):
- Date
- Thread