[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re[2]: MMC
- To: tesla@xxxxxxxxxx
- Subject: Re[2]: MMC
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 04 Oct 2005 05:26:36 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Tue, 4 Oct 2005 05:26:45 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <nV3BQC.A.USE.ybmQDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Illicium Verum <sebas@xxxxxxxxxxxxxxxx>
Hello Daniel,
I'm afraid you won't come that far with a 25
Canadian dollar budget. Most builders make 5
strings to divide the current. High voltage
capacitors don't often come in a high pulse speed
(Vµs) and the ones that do are expensive. This
means a lower voltage lets say you decide to use
the DC rating of capacitors instead of the AC
rating and the capacitor is rated at 1000VDC. The
Transformers peak voltage is 21213V. To require a
minimum safety voltage for your MMC (having your
budget in mind) I would go for 25KV.
Now the Primary capacitance depends on your main
frequency and voltage. This is for a:
110V 60Hz = 5.30nF
A safer capacitance for your transformer is
called LTR (Larger than resonance) and depends on
the type of sparkgap you are planning to build. This is for a:
Static spark gap (SSG) 7.95nF
Rotary spark gap (RSG) 14.85nF
230V 50Hz = 6.36nF
The RTL for 230V 50Hz systems are:
Static spark gap (SSG) 9.54nF
Rotary spark gap (RSG) 17.82nF
Ok, now you just devide the max DC rating by the
required voltage of 25000, this means if you buy
capacitors of 1000VDC you would need 25 per
string, this times 5 strings. But with your
budget this will only be one string. This means
your MMC will not live that long. You could look
on ebay to see if you can get a good deal?
I have used for my 15KV 30mA 55 caps per string
(I used ACV rating) and build a 5 string's MMC.
I hope this helped?
Best regards,
Sebas.
Tuesday, October 4, 2005, 5:48:23 AM, you wrote:
> Original poster: "Daniel Giv'r"
>
<<mailto:transworldsnowboarding19@xxxxxxxxxxx>transworldsnowboarding19@xxxxxxxxxxx>
> Hey, I have decided to switch from a saltwater
> capacitor to a MMC. I am planning on getting
> either a 15KV 30mA transformer and i dont really
> know how to calculate it. I have tried many
> online calulators but i dont know what would be
> the best type.... should I go with hundreds of
> caps with very small capacitance or a couple with
> larger capacitance? I am on a fairly small
> budget ($20-25) for just the caps. please E-mail
> back with some info it would be of immense help, Thanks a lot
> Daniel from Canada
>>From: "Tesla list" <<mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx>
>>To: <mailto:tesla@xxxxxxxxxx>tesla@xxxxxxxxxx
>>Subject: Re: AC Resistance of wires - was 8 kHz Tesla Coil
>>Date: Sun, 02 Oct 2005 22:34:22 -0600
>>Original poster: "Gerry Reynolds"
<<mailto:gerryreynolds@xxxxxxxxxxxxx>gerryreynolds@xxxxxxxxxxxxx>
>>Hi Antonio,
........
Best regards,
Sebastiaan