[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: New to this
- To: tesla@xxxxxxxxxx
- Subject: RE: New to this
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 15 Nov 2005 17:40:59 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Tue, 15 Nov 2005 17:43:34 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <QE6x9.A.LQH.0CoeDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Qndre Qndre" <qndre_encrypt@xxxxxxxxxxx>
The current may not be the problem since you're able of getting 60 mA
if you parallel all your transformers whereas most NSTs only give 40
mA. But the voltage looks as if you'd be getting much trouble. Only
1.6 kV? Most coilers work with 10 kV AC upwards since the spark gap
will be easier to tune and quench at higher voltages.
----Original Message Follows----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: New to this
Date: Mon, 14 Nov 2005 15:17:24 -0700
MIME-Version: 1.0
R
Original poster: Stephen Timko <satimko@xxxxxxxxx>
Hey everyone, I'm new to this so I was wondering if I could get as
much help as possible.
First of all, I'm a senior Electrical Engineering student at
Youngstown State University in Youngstown, OH. We have a small group
of people that are trying to start a school funded group interested
in high-voltage design and testing, and recreating some of Tesla's
experiments. I've always been interested in Tesla Coils, but could
never find many people local to me that had any knowledge of building them.
I just bought some transformers and I was wondering if they would be
good ones to start with. I'm not looking for two foot arcs or
anything super impressive like that, just to keep in mind. The
transformers I just bought are 120Vac input, with 1650 Vac output at
10mA. I have 6 of them, so wiring for additional current if needed
is not a problem.
If anyone could give me an idea of what to really look for, I would
appreciate it.
Thanks!
--
Stephen Timko