[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
option 1 or option 2.....
- To: tesla@xxxxxxxxxx
- Subject: option 1 or option 2.....
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 07 Nov 2005 16:58:06 -0700
- Delivered-to: chip@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Mon, 7 Nov 2005 16:59:21 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <TvGYE.A.zRE.Sp-bDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Langer Giv'r" <transworldsnowboarding19@xxxxxxxxxxx>
Hi again, since i am using ALL my money to buy caps i need to choose
wisely... which one would you guys recommend: (i am using a 10KV
23mA OBIT by the way = 6.1nF resonance)
Option one: 5984-940C30S1K-F Cornell Dubilier 3KVDC 0.01uF 5
strings of 8 pcs each:
40 caps for total of 6.25nF.
(x50) 1.23 each for total of $61.50
Option two: 5984-940C30S47K-F Cornell Dubilier 3KVDC 0.047 2
strings of 12 pcs each:
24 caps for total of 7.8nF.
(x25) 2.00 each for total of $50.00
or should i just scrap both those options and go for far larger than
resonance? i am of a strictly tight budget. thanks for all the help
and hopefully i will finish my first coil within the 6 months ive
been working on it.
p.s. why is the voltage of the entire MMC (3KV * 8 = 24000 / 5
strings = 4800V??) only 4800 volts when the peak voltage of the xfrm
is 14140V?
thanks