[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Using HV COAX without stripping the shield
- To: tesla@xxxxxxxxxx
- Subject: Re: Using HV COAX without stripping the shield
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sat, 05 Nov 2005 12:31:42 -0700
- Delivered-to: chip@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Sat, 5 Nov 2005 12:39:02 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <Gt5e0B.A.4-C.RpQbDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Ed Phillips <evp@xxxxxxxxxxx>
"Hi Jim,
OK this is good to know. I have never seen 50 ohm coax with foam nor
75 ohm coax without foam, but then again.......
Gerry R."
There's lots of cheap 50 ohm "RG-8 type" coax around with foam
insulation and very skimpy copper outer braid. Crummy stuff.
Ed