Re: cap/mmc inquirery

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Gerry  Reynolds" <gerryreynolds@xxxxxxxxxxxxx>

Hi Dr R.

Resonance with a 10KV 23ma source is 6.1nf, so shouldn't he use 
something closer to 10nf.

Gerry R


> Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
>
>
> 23 mA xmfr would work good with .007 uF, so 21 caps of .15 uF 2 kV 
> in series for .0071 uF will work well with a copper tube subdivided sparkgap.
>
>
>
> Dr. Resonance
>
> > hellow everyone, i am oredering some 0.047 1000V polypropelyne film 
> > caps for my MMC.  i dont know how many i should buy tho... i have 
> > about 30$ and the caps cost $1.19 each.  I am most likely using a 
> > 10KV OBIT as power source running at 23mA.  Help would be very good, thanks
> >
> > Daniel from Canada
> >
> > _