[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
FW: 25 1.5" x 1/8"pure tungsten diamond cut close tolerance 4 sale in my stock
- To: tesla@xxxxxxxxxx
- Subject: FW: 25 1.5" x 1/8"pure tungsten diamond cut close tolerance 4 sale in my stock
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 24 May 2005 07:18:58 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Tue, 24 May 2005 07:19:26 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <i2aFZB.A.9r.cnykCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
30 or so available I measured with a digital caliper a few - close tolerance
Trade for good geek caps or $2.50 each plus shipping upps I'll take Paypal.
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Wednesday, May 18, 2005 11:31 PM
To: tesla@xxxxxxxxxx
Subject: 25 1.5" x 1/8"pure tungsten diamond cut close tolerance 4 sale
Original poster: "Jim Mora" <jmora@xxxxxxxxxxx>
Please contact me of list if interested. These are perfect for a rotor or
dilled through 1" copper pipe segments for a blown or static gap. $2.50
each.
Jim Mora 805 646 9411 please contact me off list