[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Litz Wire
- To: tesla@xxxxxxxxxx
- Subject: Re: Litz Wire
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 11 Mar 2005 15:55:40 -0700
- Delivered-to: email@example.com
- Delivered-to: firstname.lastname@example.org
- Old-return-path: <email@example.com>
- Resent-date: Fri, 11 Mar 2005 15:56:17 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <op5Dx.A.UOE.PIiMCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>
On most TCs there is no gain with Litz wire. We experimented with several
coils and found no difference under 500 khz.
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
Sent: Monday, March 07, 2005 6:59 PM
Subject: Re: Litz Wire
> Original poster: "Mike Knowlton" <amdx@xxxxxxxxxxxxxxxx>
> Subject: Re: Litz Wire
> > Mike: Is this cirrect you want to wind the SECONDARY with litz wire ???
> > Just how large is your coil ??
> > I have used fairly large wire on secondaries but never 12/36 litz
> wire.But then I did not build the coil in Wendover Utah or Col. Springs .
> > Robert H
> Hi Robert,
> I think you may misunderstand the Litz specification.
> The label 12/36 means 12 strands of # 36 wire.
> Yes, I am thinking about using the litz for the secondary,
> however, I want find out if the litz is any better than a #22 wire
> the A.C. resistance at about 300Khz.
> Clarifying note;
> A #22 wire is the same diameter as my 12/36 litz.
> I want to use the litz to raise the Q of my secondary.
> > > From: "Tesla list" <tesla@xxxxxxxxxx>
> > > Date: Sat, 05 Mar 2005 23:25:34 -0700
> > > To: tesla@xxxxxxxxxx
> > > Subject: Litz Wire
> > > Resent-From: tesla@xxxxxxxxxx
> > > Resent-Date: Sat, 5 Mar 2005 23:27:12 -0700 (MST)
> > >
> > > Original poster: "Mike Knowlton" <amdx@xxxxxxxxxxxxxxxx>
> > >
> > > I have about 1100ft of 12/36 litz wire, my understanding is this
> > > good to about 50 khz. If I wind a secondary with
> > > this and it rings at say 200khz, is this litz any better than a #30
> > > Mike
> > >
> > >