[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Streamer V/I take 2
- To: tesla@xxxxxxxxxx
- Subject: RE: Streamer V/I take 2
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sat, 23 Jul 2005 00:15:38 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sat, 23 Jul 2005 00:15:40 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <sbNuwD.A.ZVG.LCe4CB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Denicolai, Marco" <Marco.Denicolai@xxxxxxxxxxx>
Hi Terry,
The LeCroy DSO I used do writes to HD diskettes CSV files. Sadly they
are over 0.5 MB large, they are missing most of the setup data (H/V
resolutions, etc.) and they are in ADC step units! I can't have more
than 3 of them on each diskette.
The other option is "binary" files (only 200 KB each), with .WFM
extension. Now WFM is a Tektronix format and Tektronix provides
utilities to convert it to CSV, TXT, etc. Sadly, again, they all
return error when attempting to convert the LeCroy bit-mousse.
I think my only chance is to drive to the lab, reread the WFMs into
the DSO, rewrite them one by one as CSV to some diskettes and voila.
Finger gymnastics...:)
Best Regards
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Sat 7/23/2005 4:18 AM
To: tesla@xxxxxxxxxx
Subject: Re: Streamer V/I take 2
Original poster: Terry Fritz teslalist@xxxxxxxxxxxxxxxxxxxxxxx
>All the Tek scopes should be able to store "spreadsheet" files which
>are just *.CSV files:
>In some cases, you might be able to write a simple conversion program
>yourself that reworks the files too.