[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Help with my rotary gap (and other tuning problems).....
- To: tesla@xxxxxxxxxx
- Subject: Re: Help with my rotary gap (and other tuning problems).....
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sat, 16 Jul 2005 13:35:55 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sat, 16 Jul 2005 13:40:57 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <KEzGx.A.iFB.ILW2CB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Adam R." <arabraxas@xxxxxxxxxxx>
I set it up as a variable inductor (I even checked it with my L meter: 0 H
to .6H). I believe I had one connection on the tap.
I ran it and it worked (while at .6H) until I turned the knob a little then
L got smaller and the fuse blew.
I'll check the variac wiring again though....