[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Cone Primary
- To: tesla@xxxxxxxxxx
- Subject: Re: Cone Primary
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 07 Jul 2005 11:02:10 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 7 Jul 2005 11:03:48 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <PlTjz.A.-nG.yBWzCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: robert heidlebaugh <rheidlebaugh@xxxxxxxxxxxxxx>
The cone may preform beter than a flat coil.
Robert H
--
> From: "Tesla list" <tesla@xxxxxxxxxx>
> Date: Tue, 28 Jun 2005 21:41:50 -0600
> To: tesla@xxxxxxxxxx
> Subject: Cone Primary
> Resent-From: tesla@xxxxxxxxxx
> Resent-Date: Tue, 28 Jun 2005 21:42:21 -0600 (MDT)
>
> Original poster: ZanJohnZakIV@xxxxxxx
>
> I am building my first Tesla coil. My secondary coil is going to be 4.5" by
> 24" on PVC. My plan was to build a flat primary coil with 12 turns of 3/8
> over all diameter copper pipe, however it came out cone shaped. Will I have
> any problems or will I be ok?
>
> Thanks, Zan
>
>