[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: PTK supply for lifter



Original poster: "Mercurus2000" <mercurus2000@xxxxxxx>

Where did you get this supply from? Is is a actual circuit are or you just
looking at the flyback itself? If it's just a flyback, you'll need a proper
circuit to drive it, like a self resonant oscillator circuit or a 555 driven
transistor circuit, I myself am working on a adjustable high voltage supply
to power a lifter that has a cord for standard house wiring and terminals
for a 12 volt battery or equivalent for field use. Which I will be sellling
when I complete it. Look up "flyback drivers" on google to see what kind of
circuit can power a standard flyback.
Adam
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, July 04, 2005 5:39 PM
Subject: PTK supply for lifter


> Original poster: "Harold Weiss" <hweiss@xxxxxxxxxx> > > Hi All, > > I have a PTK modular HV supply for a 13" monitor. The big red wire is the > HV output, and there are 3 more wires that I don't know "what's what". The > case says +32VDC, which would be the red wire, black would be the return, > so what would the white wire do? Anybody else play with these supplies? > > David E Weiss > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.323 / Virus Database: 267.8.7/34 - Release Date: 6/29/05 > >