[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: PVC coil forms larger than 6 inch pipe

Original poster: "Ken Jenkins" <thecompman@xxxxxxxxxxxx>

Try and find a irrigation company in your area, One by me carry up to 14"
and have cutoff pieces, also the pipe is low press thin wall.
Good luck
Ken J

-----Original Message-----
From: Tesla list [mailto:tesla@xxxxxxxxxx]
Sent: Sunday, January 30, 2005 8:39 PM
To: tesla@xxxxxxxxxx
Subject: PVC coil forms larger than 6 inch pipe


Original poster: "Hydrogen18" <hydrogen18@xxxxxxxxxxxxx>

Hi list,
I'm looking for PVC pipe in the 8 inch diameter variety(or about any
suitable plastic). Does anyone know any sources for this? I'm keeping an
eye out for city water installations, but have found none yet. I can get 20
foot sections for $83, but I'd have alot of leftover. Does anyone know any
ways to get this pipe easily? I'm in the southern eastern united states in
Mobile, Alabama. If a fellow coiler were interested in doing a group
purchase of the 20 foot and splitting it up that could work also. Thanks

Eric
<http://www.hydrogen18.com/>http://www.hydrogen18.com/