[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Terry's DRSSTC
- To: tesla@xxxxxxxxxx
- Subject: Re: Terry's DRSSTC
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 10 Jan 2005 12:45:45 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- In-reply-to: <41E217D2.506@pacbell.net>
- Old-return-path: <teslalist@twfpowerelectronics.com>
- References: <41E217D2.506@pacbell.net>
- Resent-date: Mon, 10 Jan 2005 12:47:16 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <I3h7S.A.3qH.Evt4BB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Terry Fritz <teslalist@xxxxxxxxxxxxxxxxxxxxxxx>
Hi Greg,
At 10:51 PM 1/9/2005, you wrote:
Hi Terry,
Looks like a lot of very clean design work. What PCB capture are you using?
I am just using the free software from ExpressPCB:
http://www.expresspcb.com/
It is a real simple PCB layout program. You just lay it out and then you
push a button and they make it for you and you have it in a few days. Be
sure to check them out if you have not before!! I cam make PC boards here
too but they just make it too easy and they do real nice work! Their "mini
board service" is very inexpensive so I try to cram stuff into that size.
Cheers,
Terry