[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
CAUAC: photos of new spark gap
- To: tesla@xxxxxxxxxx
- Subject: CAUAC: photos of new spark gap
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sun, 09 Jan 2005 17:16:59 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sun, 9 Jan 2005 17:19:20 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <weAAPC.A.x6H.Ioc4BB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: syd <tesla@xxxxxxxxxxxxxxx>
Here's a link to a couple photos of the new spark gap that I just finished
for CAUAC.
It weighs about 150lbs. and the rotors are 16 inches in diameter. At
5000rpm I should be able to get dwell down to three or four wavelenghs.
The electrodes are two inches wide and .25 inches thick copper.
http://www.playahearth.com/sydtesla/BDO%20Final%20Prep/index.html
syd klinge