[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: My first MMC cap test.
- To: tesla@xxxxxxxxxx
- Subject: Re: My first MMC cap test.
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sun, 09 Jan 2005 15:59:54 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sun, 9 Jan 2005 16:01:29 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <sLH8xD.A.6mD.Ifb4BB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Jim Lux" <jimlux@xxxxxxxxxxxxx>
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Sunday, January 09, 2005 11:08 AM
Subject: Re: My first MMC cap test.
> Original poster: "david baehr" <dfb25@xxxxxxxxxxx>
>
> So, one could seiries a two bushing Xfrmer if you DID NOT GROUND/CONNECT
> the cases ??
>
Not for NSTs...
The secondary on a (two bushing) NST is centertapped, and the centertap is
connected to the transformer core, and then to the case. The insulation
strength from the core to the primary winding isn't enough to insulate
against full secondary voltage.