[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OLTC Measuring Peak Current

Original poster: "Paul Benham" <paulb@xxxxxxxxxxxxxxxxxxxx>

Hi Adam,

Try the following company if you want to make it easy for yourself.  Their
prices look very reasonable for the ring type transformers.



Paul Benham.

----- Original Message ----- From: "Tesla list" <tesla@xxxxxxxxxx> To: <tesla@xxxxxxxxxx> Sent: Tuesday, January 04, 2005 12:11 AM Subject: OLTC Measuring Peak Current

> Original poster: "Adam Horden" <adamhorden@xxxxxxxxxxxx> > > Hi All > > I am currently rebuilding my OLTC. I have rebuilt the controller and > preliminary test show that it's working in constant BPS mode but the > interrupted drive needs some work. > > I was wondering how I can go about measuring the peak current. I was > planning to measure it on one side of the capacitor bank (not the > neutral side) > > I don't have room in the low inductance layout for my ion physics > current transformer (its about 6 inch dia). > > I was wondering how I can measure the peak current. > > Maybe a current transformer wound on a 1inch ferrite core? > > Adam > > > > > > Yahoo! Groups Links > > <*> To visit your group on the web, go to: > http://groups.yahoo.com/group/tcbouklist/ > > <*> To unsubscribe from this group, send an email to: > tcbouklist-unsubscribe@xxxxxxxxxxxxxxx > > <*> Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > > > > This message has been scanned for viruses by MailController - www.MailController.altohiway.com >