[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Advice on Primary
- To: tesla@xxxxxxxxxx
- Subject: Re: Advice on Primary
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 22 Feb 2005 19:04:08 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Tue, 22 Feb 2005 19:04:23 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <kjOUBB.A.CJE.kS-GCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: TCBal@xxxxxxx
continuous is correct. No soldered additions. Leave the roll rolled, just
sort of "arrange" it. Plastic clamps used in TV cable installations work
well. Start on the inside. Hope some of this MIGHT be correct, but I am
eager to help. I am in no way responsible for any of this advice, and am
held harmless in any event up to and including death. Good Luck. Read some
of the Primary construction pages around. All much better ideas than mine.